Best Reviews of Tilt Trim Motor By Arco

Tilt Trim Motor By ArcoBuy Tilt Trim Motor By Arco

Tilt Trim Motor By Arco Product Description:



  • ARCO 6250, ARC6250

Product Description

TILT/TRIM MOTOR HEAVY DUTY Fits: late model Mercury 135, 150 XR6 Magnum III, 175, 200, 225, 250 hp, 105-140 hp Jet. Replaces: Mercury 828708. Two wire connection. Flat-blade shaft. Bullet connector Terminal Ends This motor lwill NOT replace an earlly model Mercury cartridge pump. Order Part ARC6278 below.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Nice motor
By mr1dfl
Last year I purchased a cheap trim motor and that's what I got. It was a piece of crap that was maybe used 8 outing(fresh water only) and failed. After inspection of the old unit the internals were corroded. This motor is made with quality and in the US. No more cheap overseas motors for me if I can help it. The motors is quick and quiet and I would highly recommend it. Shipping was also very quick, maybe one or two days to arrive to my house.

0 of 0 people found the following review helpful.
5john
By john
The product is as pictured and performed excellent.It is a high quality product.I recommend this product to anyone needing this particuliar item.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Tilt Trim Motor By Arco

Deals for Orrefors Intermezzo Blue Martini Glasses, Set of 2

Orrefors Intermezzo Blue Martini Glasses, Set of 2Buy Orrefors Intermezzo Blue Martini Glasses, Set of 2

Orrefors Intermezzo Blue Martini Glasses, Set of 2 Product Description:



  • Designed by Swedish artist Erika Lagerbielke
  • Award winning design!
  • Gorgeously accented with a single color drop in the stem
  • Handmade by master glassmakers in Orrefors' Swedish glassworks
  • Lead Free

Product Description

Intermezzo Blue is Erika Lagerbielke's hugely successful stemware and tableware series with the familiar blue drop in the stem. When designing Intermezzo, Erika was fascinated by the interplay between the austerity of the clear glass form and the life-giving blue drop - a drop that demands attention without raising its voice.

Customer Reviews

Most helpful customer reviews

3 of 4 people found the following review helpful.
5More lovely in person - Great Gift
By nycgirl
I'm very picky about glassware. Bought these on line because I was unable to shop in person. The picture doesn't do them justice; they are lovely with beautiful touch of blue. Gift was a hit. Expensive, though.

2 of 3 people found the following review helpful.
5perfectini
By Bernadette Geichenhaus
Thees were replacement glasses and as before the most elegant , thin lipped glass imaginable......Perfect for sipping

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Orrefors Intermezzo Blue Martini Glasses, Set of 2

Discounted Tilt Motor Omc

Tilt Motor OmcBuy Tilt Motor Omc

Tilt Motor Omc Product Description:



  • ARCO 6242, ARC6242

Product Description

TILT/TRIM MOTOR Fits: OMC 92-up, J-suffix 40, 48, 50 hp. Replaces: OMC 437801. 2 wire connection.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Great motor, met all expectations!
By Slyoldfox
This motor came with a new seal for the connection between the tank and the motor. I hooked it up, filled the tank and away it went. It took about ten times up and down for me to get most of the air out of the cylinder. It was overall a great purchase and I would recommend it to others.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Tilt Motor Omc

Price Comparisons for Oxford Garden Chaise Lounge Cushion, Hunter Green

Oxford Garden Chaise Lounge Cushion, Hunter GreenBuy Oxford Garden Chaise Lounge Cushion, Hunter Green

Oxford Garden Chaise Lounge Cushion, Hunter Green Product Description:



  • Quick drying, mold and mildew resistant, fire retardant cushion for Oxford Garden chaise lounge
  • Manufactured with Sunbrella 100% solution dyed acrylic
  • 3-1/2-inch-thick thermal bonded polyester core
  • 23-1/2 inches wide by 77-3/4 inches deep
  • 48-inch seat and 30-1/2-inch back

Product Description

Add comfort and style with our specially designed cushions. All of our cushions are made of Sunbrella fabric. Developed from 30 years' experience with awnings and boat, Sunbrella is made of durable, all weather solution-dyed acrylic. Each cushion has ample length ties to keep your cushion in place even during those gusty days. Single piping provides a clean looking finished edge. These cushions are filled with 3 inches of foam and polyester that makes our already comfortable benches and chairs even more so. Sunbrella feels soft and comfortable to the touch but is rugged outdoors. It retains its color and strength while withstanding years of exposure to sunlight and rain.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5ELATED!
By VRod
This chaise lounge cushion was beyond my expectation. The color is true and vibrant and matches my prior Sunbrella chair cushions and deck awnings identically. The quality of the fabric and cushion fill was excellent, comfortable and it fit perfectly on my chaise lounge. It repels water 100% and does not stain. I am beyond pleased with this purchase and would recommend this chaise lounge cushion to everyone.

0 of 0 people found the following review helpful.
2Shame on Oxford Garden!
By Denvermitch
Shame on Oxford Garden for cheapening their product! I ordered 2 of these chaise cushions. One was 3.5" thick but the other was 2" thick! The 2" thick model also collects water where the back and base meet. My cushion is still wet in this area from a rainstorm 36 hours ago. The other cushion was dry within half a day.In addition to the thinner size, the stitches are off in certain areas.

1 of 2 people found the following review helpful.
5Excellent for the price
By River
For a third of what others are selling this type of lounge cushion for, it's a steal. It's wide, thick and longer than most

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Oxford Garden Chaise Lounge Cushion, Hunter Green

Discounted Teleflex Tach Outboard

Teleflex Tach OutboardBuy Teleflex Tach Outboard

Teleflex Tach Outboard Product Description:



  • Made by Teleflex

Product Description

Premier - Pro Series - Type: Tachometer - Style: O/B & 4-Stroke Gas, 6000Rpm. Premier - Pro Series - Type: Tachometer - Style: O/B & 4-Stroke Gas, 6000Rpm Made by: Teleflex Part Number: 5101816

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5VERY WELL-MADE GOOD LOOKING TACH
By Scott
THIS TACHOMETER PERFORMS FLAWLESSLY AND LOOKS AWESOME. MY OLD TELEFLEX TACH WENT OUT AFTER NEARLY 40 YEARS OF SERVICE, SO OBVIOUSLY I STUCK WITH A KNOWN PERFORMER

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Teleflex Tach Outboard

Deals for Powermatic 1791291K Model 31A 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase

Powermatic 1791291K Model 31A 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 PhaseBuy Powermatic 1791291K Model 31A 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase

Powermatic 1791291K Model 31A 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase Product Description:



  • Heavy, cast-iron construction and fully enclosed stand minimize vibration
  • Powerful, 1-1/2HP motor can tackle any sanding task
  • 12-inch balanced disc with table tilt
  • Multi-position belt head with indexing pin and head lock allows for tool-free belt position changes
  • Table for belt head tilts 0-45 degrees downward with miter gauge slot and is adjustable for various angles

Product Description

1791291K Features: -Belt with manual switch.-Model 31A.-Belt: 6'' x 48''. Specifications: -1-1/2HP, 1Ph, 115V/230V. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 54.5'' H x 31.25'' W x 24'' D.

Customer Reviews

Most helpful customer reviews

23 of 23 people found the following review helpful.
5A very nice, well made machine!!
By M. Spaulding
I bought my machine from a local merchant and I am very impressed. Fit and finish are excellent, the sander is heavy and there is almost no vibration. The tables are cast iron and their mounting is rock solid, the belt table can be easily removed or positioned parallel to the belt for many different applications. The dust collection works extremely well also but Powermatic recommends a dust collector with at least 400 cfm. Fortunately mine is much bigger than that. I also like the capability to sand metal with the machine. The machine sands extremely well, smooth and there is no lack of power. The belt tracks well (after a little fussing at first). ... I think this is a good machine and I am sad to hear that Powermatic is difficult to deal with. I have other Powermatic machines and so far they have all worked very well. ... The Powermatic is heavier, has larger tables ... I would definitely buy this machine again!!

48 of 57 people found the following review helpful.
1Form over Fuction - The Powematic 31A Belt/Disc Sander
By Ed Jablonski
The Powermatic 31A Belt/Disc sander makes an impressive addition to any shop that already has a working machine. The unit is sturdy and good looking. The two heavy tables are esily adjusted and the T-miter slots were a nice surprise. It even comes with a small gauge, belt and disc. The belt moves smooth and easily when propelled by hand, and the disc appears true. The belt tension mechanism is quick and accessible. Despite being in the shop for over a month, an assessment of finishing quality has yet to be made. Upon initial start-up, noise and vibration were excessive. The motor overheated, tripping 20 amp breaker. Confirmed the motor was factory wired for 115V. The motor subsequently fails to wind up and cannot drive the belt/disc shaft.Powermatic was contacted about the defective motor. The Customer Service Representative was polite, but advised that it was Amazon.com's problem, warranted or not. Amazon.com has made a good faith effort to provide a functioning tool. But a new motor was incompatible with the tool power drive and new drive component, likewise, incompatible with said motor. Offered to return everything. Still waiting for instruction on return, repairing original motor or obtaining correct drive components for new motor that will not void warantee. The good folk at Amazon.com appear ill equipped to deal with Powermatic, and Powermatic doesn't want to deal with end user.Summary: Nice looking tool, doesn't work. Buy a Delta from different source.

16 of 17 people found the following review helpful.
5Good Tool but you need a dust collector
By Brian Robinson
Our shop purchased this tool about 18 months ago. It is well made and has been a great addition to our inventory. It is one of those tools that once it has been in your shop for a while you can't remember how you ever got by without it. If you are going to buy this tool I recommend that you get a dust collector. Sanding with this tool produces large amounts of very fine dust that will cover everything in your shop. The sander is only second to our table saw in dust production. A bargain for the money.

See all 10 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Powermatic 1791291K Model 31A 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase

Where Can I Buy Taylor Made Products BoatGuard Trailerable Boat Cover - Fits 17'- 19'

Taylor Made Products BoatGuard Trailerable Boat Cover - Fits 17'- 19'Buy Taylor Made Products BoatGuard Trailerable Boat Cover - Fits 17'- 19'

Taylor Made Products BoatGuard Trailerable Boat Cover - Fits 17'- 19' Product Description:



  • Made from pigment dyed gray Legacy? 3.2oz polyester fabric with shock cord in the hem
  • Fabric is treated for mildew resistance and water repellency
  • Includes storage bag and tie down straps
  • Four-ply folded seams and double folded hems for superior strength
  • 2-Year limited warranty

Product Description

Taylor Made Products is a leader in the manufacturing of boat covers. Our Boat Guard® boat covers are America-Feets best selling universal-fit trailerable boat covers. Strong enough to trailer, Boat Guards are fully capable of surviving the rigors of the road.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
4Taylor Made Boat Cover
By HondaNut
This is a decent cover for the price. It repels water better than the last cover I had. It is really nice that it comes with all the straps, which my last cover didn't. Only complaint I have is that the elastic pull-strings on the front don't seem to do anything. It's almost as if they're not connected or don't continue all the way around the rear of the cover. I can pull on the strings to tighten them up until I'm blue in the face and it only tightens around the front part, the back is still loose. I don't get it!? But I compensated by tightening down the straps and it seems to work.

1 of 1 people found the following review helpful.
5good production
By H
good quality product better than my old tarpaulin. I recommend this product especially if you want to leave it on the trailer and you roll with it.

1 of 1 people found the following review helpful.
4Taylor Made Products BoatGuard Trailerable Boat Cover - Fits 19'- 21'
By George L Brecht
Cover fit perfectly and the pull cords gave a nice tight fit. It did need a few supports to keep the rain water from puddling.

See all 7 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Taylor Made Products BoatGuard Trailerable Boat Cover - Fits 17'- 19'

Sale Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase

Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-PhaseBuy Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase

Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase Product Description:



  • Powerful 5-horsepower, 1 phase, 230-volt motor
  • Plane or mold capabilities
  • Heavy-duty cast-iron table; magnetic controls
  • Three knives in cutterhead
  • 1-year warrnty

Product Description

1120003 Features: -Planer / Molder.-PM15. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 51'' H x 34'' W x 28'' D.

Customer Reviews

Most helpful customer reviews

31 of 33 people found the following review helpful.
4Powerful but particular
By Dan Forbes
The machine is absolutely heavy duty. Although, there are a few things that I have found issue with:

1) machine doesn't work well with wide poplar boards. I have a heavy duty dust collection system connected to it but the poplar creates long strands from the wide boards. These strands clog up the exhaust chute causing the shavings to back up onto the outfeed roller and stop the boards from continuing through the planer part way through a feed. Basically have to lower the table and pull the board out to clean the strands out. This binding of the strands has tore up the outfeed urethance rollers to the point of no return. ***update: I was able to take the rollers off the machine and turn the urethane down on an engine lathe to straighten the urethane after much use. (note: high rpm, low feed rate and a touch with sand paper when finished) Works better than new now. I should be able to do this a few times before having to buy new ones. By the way, the new rollers are pretty cheap to replace.***

2) Wish the table length was longer or adaptable to adding an extension. Would be nice.

The machine is very easy to work with and work on. The molding feature is great and works well. I've done all the trim in my new house with this machine. Hope to have a long future with it in my business.

34 of 37 people found the following review helpful.
4A Lot of Machine For the Money
By Ty W. Putnam
When this planer arrived at my shop I couldn't wait to get it out of the crate and plugged in. I was pleasantly surprised to see how heavy the machine was built, its beefy stature screamed, throw anything at me I can plane it, and after some adjusting it did. I ran pine and white oak threw it, and it produced a wonderful finish on both. The one problem I have had is trying to plane exceptionally wide boards. For some reason if I plane a board 10" wide or better it machine has some trouble feeding the board threw. I found that with some adjustment of the spring tension on the urethane infeed and outfeed rollers this can be reduced but not completely eliminated. Other than this the machine runs great. It is easy and safe to operate, and fun to use. This planer is another fine example of Powermatic's expertise in building heavy-duty home shop machinery.

21 of 24 people found the following review helpful.
4You little Birch!!!
By Thomas Brien
About eight months ago I purchased the powermatic PM-15 from a local tool supply store. I have loved using this fine machine for planing and moulding, and it has preformed flawlessly, that is until I got my first paying customer. A gentleman that lives near me brought me a load of roughsawn birch to plane down and run 50' of crown and 50' of panel moulding for him. While most of it (80 percent) came out nice, most of the pieces had some tearout, and 1 piece of crown was completly trashed. What a nightmare! I was suprised at this because I've run poplar, red oak, and pine through this machine with very little tearout (mainly around knots and hard areas). I can't fault the machine, I suppose, but I wrote this to warn any future millwrights about working birch.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Powermatic 1120003 Model PM15 15-Inch 5-Horsepower Planer/Molder, 230-Volt 1-Phase

Best McGard 74057 Marine Propeller Lock Set (M22 x 2.0 Thread Size) - Volvo DP- S (Duo- Prop) - Set of 1

McGard 74057 Marine Propeller Lock Set (M22 x 2.0 Thread Size) - Volvo DP- S (Duo- Prop) - Set of 1Buy McGard 74057 Marine Propeller Lock Set (M22 x 2.0 Thread Size) - Volvo DP- S (Duo- Prop) - Set of 1

McGard 74057 Marine Propeller Lock Set (M22 x 2.0 Thread Size) - Volvo DP- S (Duo- Prop) - Set of 1 Product Description:



  • Overall Lock Length - 1.025"
  • M22 x 2.0 Thread Size
  • 30mm Hex Size
  • Propeller Locks
  • Set of 1 Lock and 1 Key

Product Description

The best protection available against costly propeller theft. Once installed the McGard propeller lock offers 24 hour protection during use, storage and transit. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel for maximum security. Fits the following stern drives: Volvo DP-S (Duo-Prop).

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
4Better than expected...
By REB
I wasn't expecting too much from McGard, based on previous auto wheel locks purchased, but I was pleasantly surprised at the materials, quality & value of this propeller lock. Of course time will tell how well it stands up to the corrosion of salt water, but it looks as though the right materials have been used. I'm using it on a 2007 Larson 274 Cabrio with Volvo-Penta Duo-prop. Some type of trim cap might have been a nice finishing touch, but to be honest, it's unnecessary and would probably only trap moisture and encourage corrosion. So, all in all I'm pleased with this purchase, and now much less concerned that an opportunist will take a liking to my expensive stainless props.

0 of 0 people found the following review helpful.
5Works great
By Midwest Rya
I've been using this for a few years now. I can easily take off my prop, and I'm pretty sure no one else would be able to without the key.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy McGard 74057 Marine Propeller Lock Set (M22 x 2.0 Thread Size) - Volvo DP- S (Duo- Prop) - Set of 1

Deals for Jet 708119 JMB-UMB-HD Universal Mobile Base

Jet 708119 JMB-UMB-HD Universal Mobile BaseBuy Jet 708119 JMB-UMB-HD Universal Mobile Base

Jet 708119 JMB-UMB-HD Universal Mobile Base Product Description:



  • Sturdy and strong mobile base suitable for industrial grade use
  • Adjusts from 24-by-24-to-34-by-34-Inch
  • 2 fixed and two swivel locking casters
  • Easy assembly
  • 1,200-Pound capacity

Product Description

708119 The Mobile Base adds a new dimension of flexibility to your JET machines. Equipment previously considered immovable can easily be moved by only one person - rearrange your shop for special projects in just minutes. With 2 fixed and 2 swivel casters, the adjustable width and length let you configure the base to the tool for total support and portability. Features: -Spring pin snap adjustment requires no tools for easy assembly. -Adjustable width and length let you configure the base to the tool for total support and portability. -Two fixed and two swivel casters provide easy maneuverability. -Available in heavy-duty or industrial duty styles to meet your needs. -Style: heavy-duty. -Capacity: 1200 lbs. -Ground Clearance:.63"". -Size (L x W): 24 x 24"" to 34 x 34"". -Dimensions: 15"" H x 32"" W x 74.5"" D.

Customer Reviews

Most helpful customer reviews

22 of 22 people found the following review helpful.
5Durable, despite plastic casters one reviewer didn't like
By P. Marks
I own and have used Delta, HTC, Ridgid, Grizzly, and home built mobile stands with $50 casters on each corner, spending up to $300 for an HTC custom built for my MiniMax (with plastic casters by the way). While cast iron or rubber-tired steel casters have their place, plastic has held up just fine for my use (which includes 1/2 the shop with concrete and 1/2 in rough plywood flooring. I frequently negotiate a 1/4" bump between the wood and concrete and also go over a sill to the outside. The Jets have done just fine.What I like about the Jet, compared to the HTC and others, is that it's easy to back tools against a wall and lock them in place with the Jet. One tip -- you do want to secure your tool to the base for maximum stability. A plywood sub-base attached to both the often flimsy open sheet metal base of your tool and then with one bolt through each corner brace of the Jet base removes a lot of flex. Flex is the one limitation of the Jet (it really should get 4.5 stars because of this), but is easily overcome to create a 5 star solution.

18 of 20 people found the following review helpful.
1always mobile
By A Customer
This base would not immobilize my Super Saw for use. With all four casters locked, it still moved when I leaned on it. Also, it requires locking/unlocking each wheel independently (a pain) and it seemed no matter which way I moved the saw, one of the swivel casters was under the steel plate, requiring me to bend down and engage the butterfly lock with my hands. There is no privision for leveling/stabilizing the tool. In contrast, the Delta contractor's saw base I replaced it with has one big lever you step on, after which you can literally spin the saw around and nice big adjustable rubber feet to stabilize it. Definitely worth another $.

8 of 8 people found the following review helpful.
5Really works well!
By George Heiser
I see the price has risen....mine was $79.99 with the free shipping. But this unit is very good. It took all of 3 minutes to put it together and about 10 more to slide it under my Delta 10" Radial Arm Saw. It came with all four corners/casters fully assembled, all I had to do was measure, pull out the spring loaded stops and slide the corners to the desired length on the stretchers. Truly, it could not be easier or quicker! When all four of the casters are locked it does not move unless you put so much pressure against it that they slide on the concrete (which incidentally I did). However, I found that it seemed to need more pressure to slide the saw now with the Jet Base than it did when all I had was the saw sitting on the shop floor.Best of all, finally, I can put the saw out of the middle of the floor....EASILY!! Highly recommended.

See all 33 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Jet 708119 JMB-UMB-HD Universal Mobile Base

Best Price McGard 74039 Marine Propeller Lock Set (3/4"- 16 Thread Size) - Mercury/MerCruiser/OMC - Set of 1

Buy McGard 74039 Marine Propeller Lock Set (3/4"- 16 Thread Size) - Mercury/MerCruiser/OMC - Set of 1

McGard 74039 Marine Propeller Lock Set (3/4"- 16 Thread Size) - Mercury/MerCruiser/OMC - Set of 1 Product Description:



  • Overall Lock Length - 1.025"
  • 3/4" - 16 Thread Size
  • 1 - 1/16" Hex Size
  • Propeller Locks
  • Set of 1 Lock, 1 Key, 1 Washer and 1 Cap

Product Description

The best protection available against costly propeller theft. Once installed the McGard propeller lock offers 24 hour protection during use, storage and transit. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel for maximum security. Fits the following stern drives and outboard motors: MerCruiser Alpha I, Bravo I (incl. X and XR), TRS, Vazer, OMC Cobra and King Cobra, Mercury/Mariner 70 hp and larger (2 stroke), Mercury 40 hp and larger (4 stroke) (ex. 225 hp 4 stroke before 2005), Optimax 75 hp and larger, Verado 135 hp and larger, Johnson/Evinrude 150 hp and larger (2 stroke).

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
5Easy to install
By Mokabe
The McGard prop lock was easy to install on my 75 HP Merc. Took off factory nut on prop shaft and replaced with enclosed bellville washer and lock. Directions were very clear for the different manufacturers. Also nice to see this lock set made in USA

1 of 1 people found the following review helpful.
5Great product and easy to install
By Matthew Lenz
This product was very easy to install and I'm hoping it will prevent someone from swiping my very expensive stainless prop. If you would like to order an additional key do not bother with the mail in envelope. Just call their customer service line, (800)444-5847, which is on the documentation that came with the product. They can register and order whatever you want (new locks, new keys) right over the phone with your credit card.

0 of 0 people found the following review helpful.
4The lock fit the prop. Easy to install.
By Gregory A Rubin
I will see this summer how it works and if the prop stays on. My SS prop was a few dollars and do not want the prop to be taken from me.

See all 11 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy McGard 74039 Marine Propeller Lock Set (3/4

Discounted Minolta Dimage Xi 3.2MP Digital Camera w/ 3x Optical Zoom

Minolta Dimage Xi 3.2MP Digital Camera w/ 3x Optical ZoomBuy Minolta Dimage Xi 3.2MP Digital Camera w/ 3x Optical Zoom

Minolta Dimage Xi 3.2MP Digital Camera w/ 3x Optical Zoom Product Description:



  • 3.2 megapixel sensor captures enough detail to create photo-quality 8 x 10 prints and medium-quality prints up to 11 x 14
  • 3x optical plus 4x digital (12x total) zoom lens with autofocus
  • Included 16 MB Secure Digital (SD) card
  • Connects with Macs and PCs via USB port
  • Rechargeable Lithium-Ion battery included

Customer Reviews

Most helpful customer reviews

71 of 73 people found the following review helpful.
5Great compact camera 3MP + 3X Optical Zoom
By A Customer
After doing a lot research, I decided to buy this little Minolta wonder while on a trip to Japan a month ago.Sure there are cheaper 3MP cameras in the market, but none of them combines the design, quality, functions and capabilities of the Dimage Xi in such a small package. There also some 4MP cameras that are cheaper or in the same price range of the Xi, but they are bulkier, besides for the common user as myself 3MP image quality is more than enough.It has the fastest startup in its class (1.2 Seconds); and the menus as well as the instruction manuals are simple and friendly.The Dimage Xi has a lot of functions only available on bigger cameras like: 3X Optical Zoom + 4X Digital Zoom, Different ISO settings, Focus lock, Single photo, Continuous capture, Movie and Audio recording, Different flash modes, Exposure compensation, White balance and several combinations of image quality and sizes.The mini battery charges in about two hours and so far has given me a full day of shotswhile using the LCD and without the need of recharge.Its "periscope type" optical zoom is really unique and the image quality is amazing.Finally I may add that this camera is a great eye catcher, everybody seems to like it!The only complain I have is the almost useless PC software that comes with the camera.After a month of heavy use I will DEFINITELY RECOMMEND this camera.

56 of 58 people found the following review helpful.
5Worth the money
By C. Donica
This camera is amazing. It's so light and compact, it's hard to believe you've got a 3.2 megapixel camera with 12x combined zoom in your hands!

The camera uploaded/connected to Windows 2000 via USB with absolutely NO problems, and I had no trouble AT ALL at removing either the memory card OR the battery. Wish it could take standard AA or AAA batteries, but that's the tradeoff you make for a tiny package.

Also, I'm astounded with the extra features this camera offers: record short movies WITH sound, record voice messages/memos to yourself, tiny moving lens cover, internal zoom parts, FAST startup and shutdown, just to name a few. Wow.

Even the manual is easy to follow and written in plain english. I didn't try any of the enclosed photo software because Paint Shop Pro 7 is the best and easiest photo and paint software I've ever found. .

The camera also has several levels of quality. With my 128mb memory card, it can store 13 pictures on highest quality and picture size, and 1958 pictures on the lowest quality and smallest picture size. On medium settings, you'd get at least 391 pictures at a time. Not too shabby!

I'd recommend buying an extra battery pack so you won't worry about running out of power, although the batteries do last a long time if you aren't using the LCD display much.

All in all, this camera is worth the money you pay for it.

50 of 52 people found the following review helpful.
5The improved manifestation of the dimage X
By Ashegam
The DiMAGE Xi is the upgrade of the popular Dimage X and is identical in physical appearance. It employs the same f/2.8 "folded" 3X optical 37-111mm (35mm equivalent) zoom lens. The main upgrade is the CCD imager which went from 1.96 to 3.2 megapixel and now yields up to 2048 x 1536 pixel images. Other enhancements include user-selectable ISO settings, optional date imprinting, spot autofocus, an improved anti-reflective LCD and automatic e-mail file copy creation.

The contrast and color issues of the DiMAGE X have been remedied and I was quite impressed with the image quality. Even heavily backlit subjects were metered and rendered well which is quite a feat for a micro-size 3x zoom digicam.

The 1.5 inch LCD is somewhat improved for outdoor use with the new less-reflective covering. I still found myself cupping a hand around the LCD to make it easier to see in bright light. When not using the LCD as a live viewfinder, the eye-level optical viewfinder makes it easy to compose the picture in daylight and by not using the power consuming LCD, battery life is extended.

The DiMAGE X required 6 button presses to delete an image during playback as it had to be done from the menu. The DiMAGE Xi now lets you delete an image by simply pressing the flash mode/delete button on the back.

It's a bit pricy as was the dimage x, but by far this camera is one the smallerst out there, fastest, and picture quality is much improved. They pretty much fixed all the flaws of the x an made this camera 10 folds better. Pick one up, you won't regret it.

See all 41 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Minolta Dimage Xi 3.2MP Digital Camera w/ 3x Optical Zoom