Flush Pro 1" Engine Flush Product Description:
- PERKO 0456DP6, PKO0456DP6
Product Description
Flush Pro Freshwater Flushing for inboards is as simple as connecting a garden hose! Flush your boat engine safely and easily. Plastic construction, stainless steel spring. Transparent body allows for visual inspection of water flow. Check valve automatically shuts off hull intake when water pressure is applied. Adapter supplied with FlushPro makes winterizing easy. Includes valve. For 1" hose
Customer Reviews
Most helpful customer reviews
0 of 0 people found the following review helpful.
Worth the effort
By Michael Edick
I purchased two of these 1-1/4" Perko adapters for my twin 6.2L Merc inboards and one 1" Perko (reduced to 3/4") for my genny. Plumbed all three into one 5/8" feed, using a single Perko water-inlet (water-hose) fitting on the aft part of my stern's gunnel plus a couple 5/8" tees and around 30' of 5/8" supply hose. Found the 5/8"-supply was enough to feed either engine at idle, but not both at the same time. Genny actually sucked twice the flow of the big engines at idle, and the 1" Perko gasped for more water than I could give it... but it worked out just fine.I've used these Perkos in three different situations now, and they performed exactly as I hoped they would:1) in dry-dock, I was able to feed both engines and genny water from a garden hose, until they were warm-enough to change the oil (probably 3-hours)2) at my dock, I was able to flush-out the brackish/salt water from my pumps and manifolds, without having to close any seacocks (something very difficult to reach on my boat)3) I used a 3/4HP submersible pump to suck antifreeze from a 5-gallon pail, with the discharge going into my Perko (garden hose) flush-fitting. I winterized both engines and my genny (plus their mufflers) in about 1-minute each, consuming a total of 6gal of antifreeze1-1/4" Perko valve: #0456DP71-1/4" Perko valve kit (has 0499000CHR water-inlet plate and fittings): #0457DP71" Perko valve: #0456DP6I could NOT be more happy with the performance of these Perkos, though a couple buddies tried to put them down because they're all-plastic. Personally, I think the plastic (if strong enough) probably has longer/smoother operation than metal parts would have (especially in salt), but makes one a little nervous without an ABYC-certification stamp... if these crack/fail, the boat is headed straight to the bottom. I tried to get more information from Perko 3-times, and they never returned my calls/emails.
0 of 0 people found the following review helpful.marine engine essentials
By George Mackown
Make Freshwater Flushing As Simple As Connecting A Garden Hose With FlushPro, 1" inletthis product is now being used on my inboard marine engine. it is a virtual must for any skipper operating a vessel in salt water. it will insure longer life to your intake cooling system from salt water corrosion. very easy to install, well worth the price as opposed to a new water intake system!
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!