Buy Hitachi DH40MR 1-9/16-Inch SDS MAX Rotary HammerHitachi DH40MR 1-9/16-Inch SDS MAX Rotary Hammer Product Description:
- Cybernetic design increases impact energy to 10 joules or 7.93 ft./lbs
- Maximum core bit diameter is 4-1/8 inch; tool weighs 6.5 pounds
- Quiet and low vibration
- Variable speed dial controls RPM from 240-480
- 1-year warranty
Product Description
1-9/16", SDS Max Shank, Rotary Hammer, 2 Mode, Vibration Absorbing Handle, Electronic Variable Speed Control, Vario-Lock Mechanism Allows For 12 Chisel Positions, Revolutionary Internal Double Insulation Technology, Needle-Pin Slip Clutch, Built-In Electronic Control Circuit Keeps Speed Constant Even As Load Varies, High Drilling Speed 240-480 RPM With Low Vibration & Noise Level, Weight 14.3 LBS.
Customer Reviews
Most helpful customer reviews
6 of 6 people found the following review helpful.
Hunky Hammer!
By Paul Harrelson
Previous to purchasing this drill, I had been using a friends Bosch 11236 SDS hammer drill. I found myself needing to borrow it with increasing frequency and decided it was time to get one.After evaluating reviews and my budget, I decided on the DH40MR. This drill is a SDS MAX and cannot be fairly compared to my friends Bosch 11236 SDS, but the price difference when shopping was only about 15%. The difference in performance however was phenomenal, after using the DH40MR it's difficult to consider the Bosch 11236 as much of a hammer drill.The drill is very, very powerful and I have learned the hard way to brace myself while drilling. The chipper and/or hammer works extremely well and can crack 4" 2500 PSI concrete in seconds. One draw-back I have found is the drill bit and/or chisel can get stuck and this drill has NO reverse. The bit or chisel must be broken loose.Initially I didn't realize the SDS MAX was not compatible for the SDS bits, and all the SDS bits previously purchased would not fit. Later I found a SDS MAX to SDS adapter and can now use SDS and SDS MAX.The DH40MR also gives me the capacity to drill larger holes. 1-1/2" drill bit and 4" core bit. Vibration is low considering the power output. Rather heavy to lug around but the weight comes in handy when drilling or hammering. There is NO "drill only" feature on this drill, but haven't had a "drill only" application.This drill is not cheap and good bits are expensive, but it can save lots of time...
4 of 4 people found the following review helpful.Great Tool
By Peter L. Powers
This is my second of this same model. I would not buy anything different for the medium size applications. Can handle the large jobs but I don't use it for that very often. Compact design lets me use the tool where bigger bulkier tools are difficult to use. IE under floors in crawlspaces, etc. Highly recommedn this tool for the general contractor.
2 of 2 people found the following review helpful.Nifty Hammer
By Barry A. Mason
I'm a general contractor and have been looking for a good demo hammer which is both powerful and easy to handle. So far I used the hammer on two jobs (one for boring hole into concrete and the other chipping concrete) and am very satisfied.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
